Description

MULTITOOL is the ideal machine for civil engineering, construction and dredging
companies, as well as municipalities and governments who have projects in shallow waters
The MOC amphibious multipurpose dredger is a very cost effective machine capable of dredging, clearing and piling on dry land, muddy & swamp conditions in water depth up to 6.57m. The compact equipment provides an excellent alternative against various other machines capable to perform single tasks only. Easily transported by truck and is able to load and unload itself from transportation truck on its own.
The MOC amphibious multipurpose dredger concept is an Australian Marine Technology design and is an obvious choice when it comes to all environmental shallow water projects globally.
APPLICATIONS:
- Inland and coastal water ways maintenance
- Land reclamation, heritage and environmental improvements
- Clean urban, industrial, mining canals and ponds
- Aid to construction (piling etc.).

Specifications

Accommodation

Cabin: Air Conditioned, noise Resistant with excellent visibility and comfortable cabin provided, ROPS certified

Construction

Crane: an integrated Crane of 0.50 tonne for loading and unloading of detachable pontoons
Excavator: the Excavator boom has reach of 7.3m with depth covering up to 6.57m, while its arm can rotate 180 degrees. Providing 83 kN breakout force from Bucket Cylinder, 47kN Digging force from Arm Cylinder & 24.5kN lifting capacity at max reach
Hull: Hull is secured with 6 watertight compartments, and painted with 2 pack epoxy and antifoul below waterline
Stability: Two front stabilizers, with maximum depth of 5m and two rear stabilizers with maximum depth of 6.75m along with two detachable pontoons, one on each side of the dredger provides high level stability

PERFORMANCE
Dredging: 900 m3/hour pipe dia 300 mm
Maximum speed: 4.5 knots
Fuel consumption: 45 litres/hour at economic speed; 57 litres/hour at full dredging power
Turning circle: 360 degrees within own length

APPLICATIONS AND CAPABILITY
Suction Dredging: The MOC multi tool rotating cutter head has been engineered to operate in very shallow depths. The dredged material is capable of being pumped ashore by utilisation of the on board pumping arrangements and a floating 300mm pipeline. Alternatively the spoil and dredging material can be simply loaded ashore or into a barge.
Backhoe and dipper dredging: The MOC amphibious multipurpose dredger can operate a 600 litre clamshell bucket, a standard backhoe bucket of up to 700 litres and rakes of various sizes dependent on requirements. Having the versatility of being able to rotate the buckets and rakes the MOC amphibious multipurpose dredger can operate in either backhoe or dipper dredge mode, this feature is ideal for sediment removal near structures.
Aid to construction: The versatility of the MOC multi tool in construction is limitless, from the use of the various buckets, augers and rakes right through to pile driving and rock breaking.
Hydraulic piling hammer: By utilising high frequency vibration to vibrate the pile body this passes the vertical vibration to the pile which leads to changes in the soil structure around the pile, thus reducing the strength of the surrounding substrate.
The combination of excavator down force, vibrating pile hammer and pile body weight, allows the pile to be driven in a seemingly effortless way. This applies to both timber and steel piles to a maximum of 200 mm diameter.
Rock Breaker: Rock breakers are widely used in construction, mining and environmental practices, MOC saw the advantage in adding the rock breaker attachment to the range of implements available for the amphibious multipurpose dredger. Powered by the hydraulic system a powerful percussion hammer can be fitted for demolishing concrete structures or rocks.
Hydraulic Augers: Are available in a range of sizes up to 500mm, these augers are primarily used in construction and environmental refurbishment applications.

Equipment

Anchor: 1 x fwd, and 1 x aft
Bilge pump: electric
Batteries: 2 sets 24v with isolator
Bollards: 4 sets
Cleats: 2 sets
Lifting lugs: 4 off

Navigation Equipment

VHF radio, sounder, GPS and dredging depth monitoring

Engine(s)

Main engine: 1 x 270 HP, Caterpillar C7.1
Hydraulics: 450 litres hydraulic tank with cooler, 240//pm @ 5000 psi
Cooling system: Radiator air cooling
Exhausts: Dry muffler c/w spark arrestors

Electrics

Electrical: 24v / 12v, shore power connection, wiper and DC distribution panel
Lighting: Deck lights, navigation lights and search light

Recreation Facilities (Toys)

OPTIONAL MACHINERY (in US Dollars)
600 litre back hoe bucket: 4,100
Suction cutter head: 46,000
Hydraulic service crane: 15,000
Spray pipe for dredging: 2,800
225mm dia pipe for dredging - 100 metres: 7,500
Floats for 225mm pipe – 30 per 100M of pipe: 7,600
Rake attachment: 4,800
Clamshell bucket: 10,100
Hydraulic piling hammer: 29,500
Hydraulic rock breaker: 14,500
Hydraulic auger 500mm: 6,500

Safety Equipment

To match flag state requirements

Certification

All newbuild ships and boats are built to IACS Classification and flag state rules pertaining to the country of destination.

Location Map